From Auckland to your workbench.NZ delivery from $7.90
PETG Basic White — 1kg Refill Print example
Black Friday sale

Filament illustration. The inset shows the supplier’s printed colour reference; the model is not included. Packaging appearance may vary.

3D printer filament · PETG Basic

PETG Basic White — 1kg Refill

Price per unit

Was NZ$28.00

$22.90 NZD

Save NZ$5.10

8 in stock

White · 1kg · 1.75mm

White

Refill · no spool

Brand: Bambu Lab

Price for one 1kg unit. A compatible spool is required and is not included.

Payment methodsPayment details

Tap a method to pre-select it at checkout. Stock is reserved when you place your order.

  • NZ-wide courier from $7.90Calculated automatically at checkout
  • $10 Auckland same-dayNorth Shore, West Auckland and Auckland CBD.Order and successful payment required before 6pm Auckland time.Bank transfers must reach our account before 6pm.
  • Free pickup in TorbayNorth Shore, 10am–8pm

Product details

Bambu Lab PETG Basic White (30106), 1.75mm filament, sold as one 1kg refill. Reusable spool not included; fit the refill to a compatible spool before use and retain the securing straps until installation. Printed colour sample only; no printed model is included.

Supplier product reference ↗

Product specifications

Brand
Bambu Lab
Series
Basic
Material
PETG
Colour
White
Filament net weight
1kg
Filament diameter
1.75mm
Diameter tolerance
±0.03mm
Packaging
Refill · no spool
Units per purchase
One
SKU
bambu-petg-basic-white-1kg-refill
Manufacturer Part Number
G00-W00-1.75-1000-SPLFREE
GTIN / EAN
6937285509895

Manufacturer-recommended settings

PETG Basic · packaging and supplier references

Nozzle temperature
230–260°C
Bed temperature
65–75°C
Recommended print speed
Below 200 mm/s
Drying conditions
65°C for 8 hours

Start with the current filament label and your printer’s instructions. These are reference settings to tune for your equipment.

Before you print

  • One 1kg refill is supplied without a reusable spool.
  • Keep the securing straps in place until the refill is fitted to a compatible spool.
  • Follow the spool installation instructions and align the refill correctly before removing its straps.
  • Use the profile for PETG Basic and your exact printer; tune a small test print.
  • The listed bed temperature applies to smooth or textured PEI plates.
  • Drying before use is recommended. Check the spool’s temperature limit and the dryer instructions.
  • Seal unused filament with desiccant. Printed samples are colour references only.

Compare refills and spools · PETG print settings · Storage and drying

Auckland: From $7.90 · Rest of North Island: From $11.90 · South Island: From $15.90. Calculated at checkout →

From our customers

Customer Reviews

No reviews yet

Reviews from verified buyers. Honest feedback, positive or negative, is welcome.

More colours to explore