Filament help
PETG printing guides
Choose your filament
- Choose your PETG filament: compare colours, roll sizes, refills and spool requirements.
- PETG vs PLA: compare stiffness, toughness, heat and printing behaviour for your project.
Set up your print
- PETG print settings: find the supplier guidance for your exact filament series.
- Drying and storing PETG: check drying instructions and keep moisture out between prints.
Fix a print problem
- PETG stringing: work through moisture, temperature and retraction checks.
- PETG bed adhesion: check the build surface, first layer and safe part removal.
Print for an electronics project
- Design a PETG enclosure for an ESP32-S3: measure the board, describe the case and print a parametric design.
- Build a filament dry-box humidity monitor: watch the air around your filament with an ESP32-S3 board.
- ESP32-S3 project ideas for NZ homes: seven builds with a printed PETG part.
Find a roll
Browse all PETG filament, 1kg refills, 3kg large spools, Bambu Lab PETG Basic refills or greatsimple PETG HF.