From Auckland to your workbench.NZ delivery from $7.90

Auckland stock · New Zealand delivery

greatsimple PETG HF filament

Browse greatsimple PETG HF, a high-flow PETG series in 1.75mm diameter. Each product contains one 1kg roll. Choose a refill for a suitable reusable spool, or a colour marked with spool included.

Choose your PETG HF colour and packaging

greatsimple PETG HF Pink 1kg refill coil, vacuum-sealed with a desiccant pack, beside its cardboard box
Black Friday sale

greatsimple

PETG HF Pink — 1kg Refill

1kg · Refill, no spool

Was NZ$19.90

$13.90 NZD

Save NZ$6.00

2 in stock

What does PETG HF mean?

HF identifies this supplier’s high-flow PETG series. The name alone does not establish a print speed for your machine. Flow depends on the exact filament, hotend, nozzle, temperature and print profile. Start from suitable material and printer guidance, then check a small test before a longer job.

This page lists greatsimple PETG HF. It is separate from Bambu Lab PETG Basic, which we sell as Black and White refills. Similar material names across brands do not establish identical settings.

Refill or spool included?

Check the packaging on each card. Yellow, Red and Pink have spool-included listings. Pink is also available as a separate refill, alongside the other listed refill colours. These are different products; the colour name alone does not tell you whether a spool is included.

A refill needs a compatible reusable spool. Follow the refill maker’s fitting instructions and keep the coil secured until the spool is assembled. Check your holder and feeder requirements before opening it. You can also compare all PETG refills across the stocked brands.

greatsimple PETG HF temperature references

The supplied HF reference is a 225–255°C nozzle range, 70°C bed temperature, and drying at 60–65°C for 6–8 hours. Use the current label alongside your printer, build surface and spool limits. These supplier references are not shop-tested settings or a guaranteed speed rating.

The PETG settings table compares the stocked series. See drying and storage for handling an opened roll, or stringing troubleshooting if threads develop between features.

Which colour should I choose for a practical part?

Use the product photographs and printed samples as a colour reference. The sample models are not included. If you are still choosing a material, our PETG vs PLA comparison explains stiffness, toughness, heat exposure and printing tradeoffs.

Order online and pay by credit or debit card, or by ANZ bank transfer. Auckland: From $7.90 · Rest of North Island: From $11.90 · South Island: From $15.90. Shipping is calculated automatically at checkout; Rural Delivery costs extra. Select free pickup at checkout for collection in Torbay, Auckland, 10am–8pm. We'll confirm pickup details after you place your order. Delivery, payment and pickup details →