From Auckland to your workbench.NZ delivery from $7.90
PETG HF Black — 1kg Refill Print example

Filament illustration. The inset shows the supplier’s printed colour reference; the model is not included. Packaging appearance may vary.

3D printer filament · PETG HF

PETG HF Black — 1kg Refill

Price per unit

$19.90 NZD

2 in stock

Black · 1kg · 1.75mm

Black

Refill · no spool

Brand: greatsimple

Price for one 1kg unit. A compatible spool is required and is not included.

Payment methodsPayment details

Tap a method to pre-select it at checkout. Stock is reserved when you place your order.

  • NZ-wide courier from $7.90Calculated automatically at checkout
  • $10 Auckland same-dayNorth Shore, West Auckland and Auckland CBD.Order and successful payment required before 6pm Auckland time.Bank transfers must reach our account before 6pm.
  • Free pickup in TorbayNorth Shore, 10am–8pm

Product details

greatsimple PETG HF Black, 1.75mm filament, sold as one 1kg refill without a spool. A compatible reusable spool is required; fit the refill before removing its securing straps. The supplier recommends 225–255°C nozzle temperature and a 70°C bed as starting settings. Printed deer shown as a colour example only; the model is not included.

Supplier product reference ↗

Product specifications

Brand
greatsimple
Series
HF
Material
PETG
Colour
Black
Filament net weight
1kg
Filament diameter
1.75mm
Packaging
Refill · no spool
Units per purchase
One
SKU
greatsimple-petg-hf-black-1kg-refill

Manufacturer-recommended settings

PETG HF · packaging and supplier references

Nozzle temperature
230–250°C
Bed temperature
70°C
Supplier Bambu printer example
240°C nozzle, 0.95 flow ratio
Example maximum flow: P1 / P2S / X1 / H2 series
13 mm³/s
Example maximum flow: A1 series
9 mm³/s
Cooling fan
10–40%
Drying conditions
60–65°C for 6–8 hours in suitable filament-drying equipment

Start with the current filament label and your printer’s instructions. These are reference settings to tune for your equipment.

Before you print

  • Check whether this colour is a refill or includes a spool before ordering.
  • For refills, fit a compatible spool before removing the securing straps.
  • Keep the vacuum packaging sealed until use; reseal open filament with desiccant.
  • The supplier’s Bambu printer examples start from PETG Basic settings and require tuning. This filament is made by greatsimple.
  • Packaging and spool appearance may vary between supplier batches.
  • Check the spool’s temperature limit before drying. Printed deer are examples and are not supplied.
Supplier material properties
Density
1.27 g/cm³
Tensile strength
50 MPa
Tensile modulus
2412 MPa
Flexural strength
75 MPa
Flexural modulus
2205 MPa
Elongation at break
8.2%
Impact strength
32 kJ/m²
Hardness
78.5 Shore D
Heat deflection temperature
75°C
Water absorption
0.11%

Values transcribed from the supplier’s PETG HF information. Test conditions are not fully specified; these are not 3DGo test results or a guarantee for a printed part.

Series illustration & featuresgreatsimple PETG HF supplier series illustration with English captions

General series illustration. The colour, weight and packaging supplied are those listed for this product.

Compare refills and spools · PETG print settings · Storage and drying

Auckland: From $7.90 · Rest of North Island: From $11.90 · South Island: From $15.90. Calculated at checkout →

From our customers

Customer Reviews

No reviews yet

Reviews from verified buyers. Honest feedback, positive or negative, is welcome.

More colours to explore