Print example Filament illustration. The inset shows the supplier's printed colour reference; the model is not included. Packaging appearance may vary.
3D printer filament · PETG HF
PETG HF Latte — 1kg Refill
Price per unit
Was$13.90 NZD
Save NZ$6.001 in stock
Latte · 1kg · 1.75mm
Latte
Refill · no spool
Brand: greatsimple
Price for one 1kg unit. A compatible spool is required and is not included.
Tap a method to pre-select it at checkout. Stock is reserved when you place your order.
Product details
greatsimple PETG HF Latte, 1.75mm filament, sold as one 1kg refill without a spool. Fit a compatible spool before removing the securing straps. The supplier recommends 225–255°C nozzle temperature and a 70°C bed as starting settings. The printed deer is a colour example only and is not included.
Product specifications
- Brand
- greatsimple
- Series
- HF
- Material
- PETG
- Colour
- Latte
- Filament net weight
- 1kg
- Filament diameter
- 1.75mm
- Packaging
- Refill · no spool
- Units per purchase
- One
- SKU
- greatsimple-petg-hf-latte-1kg-refill
Manufacturer-recommended settings
PETG HF · packaging and supplier references
- Nozzle temperature
- 225–255°C
- Bed temperature
- 70°C
- Supplier Bambu printer example
- 240°C nozzle, 0.95 flow ratio
- Example maximum flow: P1 / P2S / X1 / H2 series
- 13 mm³/s
- Example maximum flow: A1 series
- 9 mm³/s
- Cooling fan
- 10–40%
- Drying conditions
- 60–65°C for 6–8 hours in suitable filament-drying equipment
Start with the current filament label and your printer’s instructions. These are reference settings to tune for your equipment.
Before you print
- Check whether this colour is a refill or includes a spool before ordering.
- For refills, fit a compatible spool before removing the securing straps.
- Keep the vacuum packaging sealed until use; reseal open filament with desiccant.
- The supplier’s Bambu printer examples start from PETG Basic settings and require tuning. This filament is made by greatsimple.
- Packaging and spool appearance may vary between supplier batches.
- Check the spool’s temperature limit before drying. Printed deer are examples and are not supplied.
Supplier material properties
- Density
- 1.27 g/cm³
- Tensile strength
- 50 MPa
- Tensile modulus
- 2412 MPa
- Flexural strength
- 75 MPa
- Flexural modulus
- 2205 MPa
- Elongation at break
- 8.2%
- Impact strength
- 32 kJ/m²
- Hardness
- 78.5 Shore D
- Heat deflection temperature
- 75°C
- Water absorption
- 0.11%
Values transcribed from the supplier’s PETG HF information. Test conditions are not fully specified; these are not 3DGo test results or a guarantee for a printed part.
Series illustration & features

General series illustration. The colour, weight and packaging supplied are those listed for this product.
Compare refills and spools · PETG print settings · Storage and drying
From our customers
Customer Reviews
No reviews yet
Reviews from verified buyers. Honest feedback, positive or negative, is welcome.
Write a review
Purchased this product? Open the private review link in your order email to verify your purchase automatically.
Need an invitation? Contact us using your order email. No account is required.
Already have an invitation link?
More colours to explore
Print example