Original supplier photograph, with no recolouring. One 1kg filament roll with a spool is supplied. The printed hand is a colour example and is not included.
3D printer filament · PETG ECO
PETG-ECO Pink — 1kg with Spool
Price per unit
Was$18.90 NZD
Save NZ$3.092 in stock
Pink · 1kg · 1.75mm
Pink
Spool included
Brand: Tinmorry
Price for one 1kg unit. A spool is included.
Tap a method to pre-select it at checkout. Stock is reserved when you place your order.
Product details
Tinmorry PETG-ECO Pink, 1.75mm filament, supplied as one 1kg roll with a spool included. The packaging recommends a 220–240°C nozzle. Supplier reference settings are a 70–80°C bed and 40–100mm/s print speed. Tune a small test for your printer. Keep open filament sealed with desiccant and secure the filament end between uses. The printed hand is a colour example only and is not included.
Product specifications
- Brand
- Tinmorry
- Series
- ECO
- Material
- PETG
- Colour
- Pink
- Filament net weight
- 1kg
- Filament diameter
- 1.75mm
- Diameter tolerance
- ±0.03mm
- Packaging
- Spool included
- Units per purchase
- One
- SKU
- tinmorry-petg-eco-pink-1kg-spool
Manufacturer-recommended settings
PETG-ECO · packaging and supplier references
- Nozzle temperature
- 220–240°C
- Bed temperature
- 70–80°C
- Recommended print speed
- 40–100 mm/s
Start with the current filament label and your printer’s instructions. These are reference settings to tune for your equipment.
Before you print
- Supplied as one 1kg roll with a spool included. The printed hand is an example and is not supplied.
- Start with these supplier settings and tune a small test for your exact printer.
- PETG absorbs moisture after opening. Keep it sealed with dry desiccant between uses.
- Hold and secure the filament end when loading or storing the roll to prevent tangles.
- Follow the current filament label and the spool and dryer temperature limits before drying.
Supplier material properties
- Nominal diameter / supplier tolerance
- 1.75 mm / ±0.03 mm
- Density
- 1.27 g/cm³
- Supplier net weight
- 1kg per roll
- Yield tensile strength (ISO 527)
- 49 MPa
- Tensile strength at break (ISO 527)
- 50 MPa
- Flexural strength (ISO 178)
- 64 MPa
- Flexural modulus (ISO 178)
- 1800 MPa
Values transcribed from the supplier’s PETG-ECO information. Test conditions are not fully specified; these are not 3DGo test results or a guarantee for a printed part.
Compare refills and spools · PETG print settings · Storage and drying
From our customers
Customer Reviews
No reviews yet
Reviews from verified buyers. Honest feedback, positive or negative, is welcome.
Write a review
Purchased this product? Open the private review link in your order email to verify your purchase automatically.
Need an invitation? Contact us using your order email. No account is required.
Already have an invitation link?
More colours to explore
Print example