Filament guides
How to stop PETG stringing
To reduce PETG stringing, check the filament’s condition and your nozzle, confirm the correct material profile, then test temperature and retraction separately. Fine threads between parts can have several causes. Increasing retraction alone may leave the original problem unresolved.
Identify what changed
Save your current slicer profile before adjusting it. Note the filament brand and series, nozzle size, printer profile and when the problem started. Was this the first print from an opened roll, a different material, or a previously successful job with edited settings? That comparison gives you a useful place to start.
Use a small test with separated features so you can compare the same travel moves. Keep its orientation and other settings unchanged, and take a photo of each result. A useful improvement should also leave the printed walls intact.
Check in this order
- Look for filament left on the nozzle. Deposits can drag strands onto the print. Follow your printer manufacturer’s nozzle-cleaning procedure before the next test. Stop and use its support instructions if you suspect a hardware fault.
- Check moisture alongside other causes. Stringing with popping, bubbles or a changed surface can indicate damp filament. These symptoms do not prove it. Review storage history and the exact series’ drying temperature and time, including the spool’s heat limit.
- Confirm the nozzle temperature. Use the current label and the correct PETG formulation. If you are testing a lower temperature, stay within the material and printer limits. Compare the result before altering another variable; do not keep lowering it simply to chase fewer threads.
- Review retraction and travel. Start from the printer’s supported profile. Retraction pulls filament back during travel, but suitable distance and speed depend on the extrusion system. Check which moves actually trigger retraction in the slicer preview. Avoid copying another printer’s numbers.
Prusa’s stringing and oozing guide covers nozzle deposits, temperature and retraction. Bambu Lab’s print-quality troubleshooting also discusses damp filament and travel settings. Their machine-specific settings apply to the equipment described.
Use the settings for your actual roll
Our PETG print settings table separates Bambu Lab PETG Basic, greatsimple PETG HF, Tinmorry PETG-ECO and the verified R3D 3kg label values. These are supplier or label references. They are not a single profile for every PETG product or a guarantee of a string-free print.
Common questions
Does stringing always mean wet PETG?
No. Check the whole test result and recent changes. Record whether an appropriate drying cycle changed the same test before concluding that moisture caused the threads.
What retraction setting should I use?
Use the baseline for your exact printer and hotend. Keep a copy of it, change one supported setting at a time, and record both the value and the result. This guide does not prescribe a universal retraction distance or speed.
Should I buy another roll?
First establish a working baseline. If you need filament, compare PETG refills with spool-included products, and check packaging and series information before ordering. A new colour or brand still needs its own settings check.