From Auckland to your workbench.NZ delivery from $7.90
Angled view of one ESP32-S3 N16R8 development board with an antenna connector, dual USB-C ports and pre-soldered pin headers

Electronics · ESP32 S3

ESP32-S3 N16R8 Development Board – Antenna Connector & Pre-Soldered Headers

Price per unit

$24.90 NZD

58 in stock

The ESP32-S3 N16R8 development board combines a dual-core processor with 16 MB flash, 8 MB PSRAM, 2.4 GHz Wi-Fi and Bluetooth Low Energy. This version comes with an antenna connector, pre-soldered pin headers and two USB-C ports. It supports development in Arduino IDE using the ESP32S3 Dev Module board profile. Supplied as one development board. External antenna, USB cable and terminal breakout board are sold separately.

Dual-core 32-bit processor · Up to 240 MHz

2.4 GHz Wi-Fi · Bluetooth 5 LE

N16R8 · Pre-soldered headers · Antenna connector fitted

Price for one development board.

Payment methodsPayment details

Tap a method to pre-select it at checkout. Stock is reserved when you place your order.

  • NZ-wide courier from $7.90Calculated automatically at checkout
  • $10 Auckland same-dayNorth Shore, West Auckland and Auckland CBD.Order and successful payment required before 6pm Auckland time.Bank transfers must reach our account before 6pm.
  • Free pickup in TorbayNorth Shore, 10am–8pm

Product photos

A closer look at the N16R8 board

Front view of the ESP32-S3 N16R8 board, showing the module label, antenna connector and dual USB-C ports

Front view

N16R8 module, antenna connector and dual USB-C ports. The supplied board has pre-soldered headers, as shown in the angled view.

Angled view of the ESP32-S3 N16R8 board with an antenna connector and pre-soldered pin headers, with an English caption

Pre-soldered headers

ESP32-S3 N16R8 development board with an antenna connector and pre-soldered pin headers. Price is for one board.

The N16R8 version

16 MB flash. 8 MB PSRAM.

16 MBFlash storage
8 MBPSRAM
240 MHzDual-core processor · maximum

Specifications

Know your board

Processing, memory & wireless
Board variantESP32-S3 N16R8
ProcessorDual-core 32-bit processor
Maximum clock speed240 MHz
Flash memory16 MB
PSRAM8 MB
Internal SRAM512 KB
Wi-Fi2.4 GHz · IEEE 802.11 b/g/n
BluetoothBluetooth 5 Low Energy
Connections & supplied hardware
Pin headersPre-soldered
USB connectorsTwo USB-C ports
Antenna connectionExternal antenna connector fitted; PCB antenna selected by default
IncludedOne development board

Hardware notes

Before you wire it up

Antenna configuration

The board uses its PCB antenna by default. Using the external antenna connector requires changing the antenna-selection resistor configuration.

USB serial connection

This antenna-connector version uses an FT232 USB-to-serial chip. A matching driver may be required if the serial port is not recognised.

On-board RGB LED

The on-board WS2812 RGB LED is connected to GPIO48.

Power and USB host configuration

The 5Vin pin is a 5 V power input in the supplied configuration. Separate IN-OUT and USB-OTG solder jumpers are used to change power routing and enable USB host power. Check the board instructions before making hardware modifications.

Auckland: From $7.90 · Rest of North Island: From $11.90 · South Island: From $15.90. Calculated at checkout →

Guides and project ideas

More ESP32-S3 boards and accessories

Each is sold separately. Check connectors and compatibility on the product page.

From our customers

Customer Reviews

No reviews yet

Reviews from verified buyers. Honest feedback, positive or negative, is welcome.